The leading manufacturers of charcoal making machine offer a very cost-effective solution to recycle old sawdust. During this process, the economic value is also increased. This process is quite simple and converts sawdust into charcoal in as little as 20 minutes. Since the process is continuous and sealed, it is safer; so read on as we dive in.
Beston charcoal machines are already employed in several countries around the globe. These include Russia, Ukraine, Spain, and several others. Successful cases are already being globally discussed since they provide the power to recycle various raw materials. The biomass pyrolysis process employed is quite simple and can be done in just four parts.
Before materials are processed, they must first undergo the pretreatment phase. Moisture should always be less than 20%. Hence, the sawdust can be processed through a dryer. The dried sawdust then heads to the carbonization furnace where it is heated.
Since the reactor is constantly being heated, combustible gas is generated. Another byproduct of the process is sulfur and smoke discharge. Manufacturers have ensured that their machines uphold the highest environmental standards. As such, a special residual emission device is installed with the machine. More details of the biomass pyrolysis process can be found: https://ecobeston.com/biomass-pyrolysis-plant/.
A dedusting system is also put in place to successfully eliminate any combustible and sulfur gas produced. After purification, they can then be converted into wood vinegar and tar by the condenser system. When the previously mentioned steps are completed, the produced combustible gas is then recycled as a form of heat.
Produced charcoal is discharged at a relatively high temperature. Hence a cooling system is installed to ensure that the materials cool before they are handled. The charcoal produced retracts to just 30 degrees C and it increases the safety of the overall process. The byproducts of the process are useful and have been known to be a benefit to those who use them.
Sawdust charcoal is one of the best alternative forms of saving. Moreover, coconut shell charcoal is widely used as the raw materials of activated carbon. That’s why coconut shell charcoal machine is also a great investment project. This ensures that the waste chips and sawdust shavings are effectively recycled in a new and improved greenway. However, the caloric value is usually higher and it generates the least pollution.
The byproducts of this process can be easily used in the daily life of humans. It can be used for warming and even as a fuel source for cooking. Charcoal is also used within the agriculture sector as a means of improving the quality of the soil. It can also be used to remove heavy metals.
The charcoal making machine also produces products that can be used in an industrial setting. This is done in the form of activated carbon. Activated carbon is then used as a form of fuel, and it can be used during the construction of bricks.
Any gas produced is used as another source of heating and both wood vinegar and tar also have their own uses.
As we conclude, we have just looked at the sawdust charcoal machine. These machines are effective and beneficial to the environment and those around them. The byproducts created can all be used in different forms if need be.