We’re sure you’ve heard the term of wood pyrolysis before and if you’re unsure of what it really is, we’re here to further inform you. Simply put, the pyrolysis of wood is a process and not just any process but a thermochemical process that goes on to transform the cellulose as well as the structural molecules of wood into various valuable resources. This process is achieved via four processes. These being high temp pyrolysis, emission, the release of sulfur and the enrichment of charcoal.
The products achieved from a wood pyrolysis session is usually tar, wood vinegar, combustible gas and of course charcoal. Due to the idea of turning pure trash into treasure companies have developed the wood chips charcoal making machine for sale which can also commonly known as the carbonization of wood and of course charcoal making equipment. However, in order to complete the process, pre-treatment is required.
When it comes to treating the wood beforehand, it is simply dried and then crushed if it contains a moisture content of more than 20% or if the initial size is greater than roughly 50mm. After pre-treating the wood, it then undergoes the high temp stage. During this stage the wood is conveyed into the pyrolysis furnace where typical fuels are used to heat it for about 30 minutes.
As soon as the temperature begins to reach an ideal temperature, the raw materials go on to create a combustible gas as well as charcoal within the furnace. Additionally, this process occurs within a close system. This simply means that heat isn’t allowed to escape therefore reducing any potential wastage when it comes to driving the fuel cost up. After this is completed, smoke and sulfur emission occurs. The process is also called carbonization, you can click here to learn more about charcoal making machine of Beston Company.
The gas produced during the previous stage goes on to experience continued processing by the spay dedusting system in order to remove any sulfur. As such, the removal of sulfur goes on to reduce pollution of the environment. With the use of the condenser system, the by-products known as wood vinegar and tar are extracted from the gas. However, the combustible gas produced will be used again within the system to supply heat and replace coal. Get high quality coconut shell charcoal making machine here.
The charcoal enrichment stage is achieved with the use of the cooling system. During this step, the temperature is reduced to roughly 30 degrees C. This is done as a means to avoid any type of dangerous accident from occurring and coal is then discharged.
When wood charcoal is produced, it is widely used for BBQ as well as other forms of cooking, warming and simply heating. However, it is also used within the smelting industry as well as in the production of steel as an additive. And it is also made use of in the agriculture field as a form of fertilizer.
As we conclude we have just looked at what is wood pyrolysis and the sawdust charcoal machine. We’ve also gone into depth as far as the initial process is concerned. And we’ve also looked at the many uses of wood charcoal within our lives. So, don’t forget that the end products are quite valuable!